PROJET BINDERS – GRAPHINK™ CMY 3 COLOR KIT – 330 ml
TEST RESULTS ARE IN AND IT’S OFFICIAL:
GRAPHINK VS. VISIJET PXL ZB63
VisiJet PXL ZB63 has met its match. Noble 3D™ Printers emerges as the market leader in 3DP powder bed consumables. Our new flagship line of Graphink™ binders feature Graphene-Infused™, Interlock™ technology, and our True Spectrum Color Technology™, with added UV protection against color fading.
Our Graphink CMYK binders have undergone rigorous testing and certification, for approved use in 3D Systems ProJet® CJP 860Pro, ProJet CJP 660Pro, ProJet CJP 460Plus, ProJet CJP 360, ProJet CJP 260C printers and Zcorp Zprinters Z400, Z402, Z402C, Z406, Z810, Spectrum Z510, ZPRINTER Z310 PLUS, Z310, Z850, Z650, Z450, Z350, Z150 and Z250 printers, using Canon B-21 print heads, (both color and black), Hewlett Packard HP10, HP57, and HP11 print heads.
Tests conclude our Graphink CMYK line of binders perform superior to 3D Systems VisiJet PXL ZB63 CMYK binders, and Disruptive 3D™ CMYK binders. Graphink CMYK binders out performed the competition’s binders in every category of testing, except one category won by Disruptive 3D. Tests for certification and approval were conducted using 3D Systems OEM printers and components.
This video shows our new and improved, stronger formulated Composite and Binder The Eiffel Tower is being built in sections. In this we see the top 3 sections, (note these prints have only been de-powdered. Oven drying nor infiltrating has been processed. We will oven dry for 90 minutes, infiltrate with a solution of Magnesium Sulfate, (Epson Salt), and then submerge in paraffin wax for 11 seconds).
Here are is a photo gallery of models 3D printed with our products.
The Noble 3D Printers GRAPHINK™ line of advanced binders offers numerous capabilities to meet a variety of commercial applications. Leverage our innovative technologies to build strong, high-definition, full color concept models, assemblies and prototypes, for advanced communication, design realization, as well as development, and production cost reduction.
Printed models benefit Energy, Transportation, Healthcare, Education, Consumer Products, Recreation, and other vertical markets.
Parts printed with our composite materials are engineered so that numerous post printing processes can be achieved, such as sanding, drilling, tapping, painting and electroplating, which further expands the options available for finished part characteristics. Additionally, models have high-temperature resistance, ideal for digital additive manufacturing and casting applications.
Most parts can be removed from the build chamber as soon as the drying cycle is completed, (1-2 hours). For best appearance, parts should be removed from the build chamber within 24 hours. If your 3D model has thin, fragile features, allow it to dry for another hour in the printer, or in a convection oven for approximately two hours at 175 degrees Farenheit
After your 3D model is dry and fine de-powdered, it can be infiltrated.
Parts can be sanded to improve the surface finish. Start with 100-grit paper and continue to 220-grit if a smoother finish is desired.
Parts printed with GRAPHINK™ can be painted with most commonly available paints and coatings without additional processing. For the best surface finish, sand lightly, use a primer, and then apply paint.
|All trademarks are property of their respective owners and are used for informational purposes only.|
|Dimensions||2.5 x 2.5 x 5.5 in|
Only logged in customers who have purchased this product may leave a review.